1100 ffoil alwminiwm rholyn fawr

$1900-2200 /Ton

Math o Dalu:	L/C,T/T,D/A,D/P,Paypal
Incoterm:	FOB,CFR,EXW,CIF,FAS
Min. Gorchymyn:	2 Ton
Cludiant:	Ocean,Land

Cysylltwch Nawr

Disgrifiad o'r Cynnyrch

Rhinweddau Cynnyrch

Pecynnu a Dosbarthu

Disgrifiad o'r Cynnyrch

Other information

Rhinweddau Cynnyrch

Model Rhif: 1100

Statws: Half Hard

Shape: Roll

Place Of Origin: China

Pecynnu a Dosbarthu

Unedau Gwerthu

Ton

The file is encrypted. Please fill in the following information to continue accessing it

Disgrifiad o'r Cynnyrch

Cyflwyniad Cynnyrch

Gyda ffurfioldeb da, ymwrthedd cyrydiad, dargludedd thermol a chryfder penodol, defnyddir 1100 o ffoil alwminiwm yn helaeth mewn cyfnewidwyr gwres yn y diwydiant rheweiddio, cynwysyddion storio yn y diwydiannau cemegol a bwyd, a deunyddiau achos cynhwysydd yn y diwydiant electroneg.

GNEE 1100 Manteision ffoil alwminiwm:

1 、 Arwyneb glân, hyd yn oed lliw, dim blodeuo, gwastad a dim twll pin;

2, nad yw'n wenwynig ac yn ddi-arogl, yn ddiogel ac yn hylan;

3 、 Priodweddau mecanyddol cryf, ymwrthedd byrstio uchel, pwniad a gwrthiant rhwygo;

4, yn y broses o gludo, rhowch sylw i leithder y pecyn bwli, osgoi ocsidiad.
Rholyn jumbo ffoil alwminiwm

Rholyn ffoil alwminiwm 8011
Ffoil alwminiwm rholyn fawr

Mae alwminiwm 1100 ymhlith yr aloion alwminiwm mwyaf meddal ac felly ni chaiff ei ddefnyddio ar gyfer cymwysiadau cryfder uchel neu bwysedd uchel. Gellir weldio alwminiwm 1100 hefyd. Mae alwminiwm 1100 yn ddim ond un o sawl aloion alwminiwm cyffredin ac mae'n feddal, a chryfder isel. Ni ellir ei galedu gan driniaeth wres ac mae'n ffurfiol iawn.

Aging:	This material will not age, but can oxidize when left in an extremely damp environment and/or when Exposed to extreme temperatures in both hot and cold environments.
Annealing:	Annealing, which may be necessary after cold working. The material is heated to 650°F and then air cooled.
Applications:	Commonly used as tapes, fin stock, heat exchanger fins, tags, and name plates, commercial filters, decorative applications, giftware, and reflectors, and in sheet metal work.
ASTM Standards:	B479
Cold Working:	This is a excellent alloy for cold working because of the good malleability in the annealed temper. It can easily be bent, drawn, or spun into a variety of applications.
Finish:	Standard Finishes
Forging - Hot Working:	Hot working can be conducted when needed. The alloy can be hot forged.
Forming - Welding:	Forming either hot or cold is readily accomplished with this alloy. In the annealed condition this alloy can be cold worked extensively without an intermediate anneal. Easily welded by all conventional methods.
Hardening:	Hardens during cold working only.
Heat Treatment:	This alloy does not respond to heat treatment other than to anneal the material into a soft or O Temper material.
Other Physical Properties:	Electrical conductivity is 53% of copper.
Principal Design Features:	This alloy is 99.0% min pure aluminum with excellent ability to be formed and worked.
QQA Standards:	1876
Temper:	This material is available in a variety of tempers.
Thickness:	0.0005 to 0.064 in
Width:	0.375 to 60 in

Mae Stanford Advanced Materials yn croesawu unrhyw gyfle mewn ffoil alwminiwm, coil alwminiwm neu gynhyrchion dalen y gallai fod eu hangen arnoch chi. Nid yw'r manylebau a ddangosir ar y tudalennau hyn at ddibenion dylunio. Gallwch gysylltu â ni i gael mwy o wybodaeth.

Al	99.0~99.95%
Cu	0.05~0.20%
Fe	≤0.95%
Mn	≤0.05%
Si	≤0.95%
Zn	≤0.1%
Residuals	≤0.15%

Aloi alwminiwm 1100 priodweddau mecanyddol ffoil

Elongation (Annealed): ¹	35
Elongation (H12):	12
Elongation (H14):	9
Elongation (H16):	6
Elongation (H18):	5
Other Mechanical Properties:	Shear strength values are: “O” (annealed) temper 9 KSI, H12 temper 10 KSI, H18 temper 13 KSI.
Tensile Strength (Annealed): ²	13 x 1000 psi
Tensile Strength (H12):	16 x 1000 psi
Tensile Strength (H14):	18 x 1000 psi
Tensile Strength (H16):	21 x 1000 psi
Tensile Strength (H18):	24 x 1000 psi
Yield Strength (Annealed): ³	5 x 1000 psi
Yield Strength (H12):	15 x 1000 psi
Yield Strength (H14):	17 x 1000 psi
Yield Strength (H16):	20 x 1000 psi
Yield Strength (H18):	22 x 1000 psi